Category Archives: Uncategorized

Newly Designed Large Flex Joint Housing!

Summit Machine has redesigned our large flex joint housing, removing the need for a snap ring. We are now using a thicker DOM material, allowing us to machine a lip in the bottom of the housing for the flat washer. … Continue reading

Posted in Flex Joints, Quick News, Summit Machine Products, Uncategorized | Comments Off

HEIM JOINT, UNIBALL AND MATCHING HARDWARE SALE!

Now thru February 15, 2013, get 10% off any FK or Rod End Supply heim joints and uniballs! In addition, receive 15% off all hardware* purchased with heim or uniball. No minimum. No maximum. Stock up now to be ready … Continue reading

Posted in Uncategorized | Comments Off

20% off Summit Machine’s Large Billet Flex Joint.

Pre-order our Summit Machine Large Billet Flex Joint and get them at 20% off! We are going to have our large billet flex joints back in stock by January 31, 2013. This joint is as tough as it is beautiful. … Continue reading

Posted in Flex Joints, Quick News, Summit Machine Products, Uncategorized | Comments Off

Become a “fan” of Summit Machine’s Facebook page and win a Summit Machine shot glass!

Become a “fan” of Summit Machine’s Facebook page now through November 30, 2012, and you will automatically be entered to win a Summit Machine aluminum shot glass, made by yours truly!  Two winners will be drawn.  New fans only qualify. … Continue reading

Posted in Uncategorized | Comments Off

More items restocked!

We have gotten several more items restocked this last week, and many more on still getting the final touches on them. Here is a short list on the more popular items that are now available: – 1″ – 3/4″ high … Continue reading

Posted in Uncategorized | Comments Off

3/4″ Heim Spacers Back in Stock

We have just restocked our inventory of  3/4″ heim spacers. Buy them online or contact us via phone or e-mail to place an order.

Posted in Uncategorized | Comments Off

Vote for Summit Machine in Mission Small Business!

Just like many businesses, and people alike, Summit Machine has been on a roller coaster ride over the past few years. We are ready to say goodbye to that, and move on to the next step. Your support matters greatly … Continue reading

Posted in Media, Quick News, Uncategorized | Comments Off

Twin I-Beam Kingpin Knuckle part 3

With the prototype mounted and and checked over a few revisions have been made and it is now time for the production versions to be made for the class-8 build. Machined from 34lbs. of 4130 chromoly steel these knuckles should … Continue reading

Posted in Uncategorized | Comments Off

Ecotec Intake Adapter

Summit Machine’s prototype GM Ecotec intake adapters. Designed to smooth out the airflow when a 3 inch intake tube is used with the GM ecotec “drive by wire” throttle body. They are currently being tested on the class4 and class1000 … Continue reading

Posted in Uncategorized | Tagged , | Comments Off

Summit Machine’s 9ii “Round 4″

Here are some pictures of Summit Machine’s 9ii assembly. The threaded holes on the sides of the housing are for the mounting brackets. All threaded holes have been fitted with stainless steel thread locking threaded inserts. In the last picture … Continue reading

Posted in Uncategorized | Comments Off